Anyone service Technics 1200's?
Anyone service Technics 1200's?
My 1200 is f***ed, slowing down when you go above 0% pitch then, speeding up again, the pop up light is blown, and the whole is pretty dirty old and crappy, I'm in need of someone who can fix it cheap or I'm gonna sell it and get a new one.
Petee..
Petee..
- Lós Kasino—
- Posts: 3721
- Joined: Thu Nov 25, 2004 2:04 am
- Location: Brooklyn, NYC
Re: Anyone service Technics 1200's?
Calibration is pretty easy to do... did it with mine a while back...Petee wrote:My 1200 is f***ed, slowing down when you go above 0% pitch then, speeding up again
http://www.massive.com/in_tune/technics_pitch.html
hope that might help ya save some cash !!!
- johnnynostars
- Posts: 836
- Joined: Tue Dec 21, 2004 11:27 pm
I service 1200's
Petee
I run a business, servicing 1200's and other DJ gear.
The problem with your Pitch is the 0 point is calibrated by the Quartz lock. This is always 0, but when the 0 on the Pitch is out you get two 0's on your pitch. This can be fixed, no need to buy a new pitch control or anything, just requires pulling the whole thing apart and adjusting some things.
Your Cue light (The pop up light) is a constant problem I deal with. I suggest to people to get rid of the filament bulb and replace it with an LED. These will never blow again. I also offer to replace them with Blue, Orange, Green or Red LED's. The same goes for 33/45 buttons, the On Light Strobe, and the Quartz Lock LED.
I also repaint 1200's, in whatever color you like, in a Baked Enamel so is very strong, won't just scratch off like paint from a spray can. It looks awesome and will make all ya mates jealous.
I have a package if you are interested of Full Service, Clean, Pitch Adjustment, Brake Adjustment, Tonearm Balance, Repaint any color you want with Baked Enamel and replace all LEDS to any color you want for $250. A weeks turnaround and it back better than new.
Anyway if you just want the service I'm also offering 20% off first service, which includes Clean, Lube, Tonearm Balance and replace Cue Light from $66 to $55inc GST.
Give me a call on 0427 268 724
I'm in East Brunswick, Melbourne
Samurai
I run a business, servicing 1200's and other DJ gear.
The problem with your Pitch is the 0 point is calibrated by the Quartz lock. This is always 0, but when the 0 on the Pitch is out you get two 0's on your pitch. This can be fixed, no need to buy a new pitch control or anything, just requires pulling the whole thing apart and adjusting some things.
Your Cue light (The pop up light) is a constant problem I deal with. I suggest to people to get rid of the filament bulb and replace it with an LED. These will never blow again. I also offer to replace them with Blue, Orange, Green or Red LED's. The same goes for 33/45 buttons, the On Light Strobe, and the Quartz Lock LED.
I also repaint 1200's, in whatever color you like, in a Baked Enamel so is very strong, won't just scratch off like paint from a spray can. It looks awesome and will make all ya mates jealous.
I have a package if you are interested of Full Service, Clean, Pitch Adjustment, Brake Adjustment, Tonearm Balance, Repaint any color you want with Baked Enamel and replace all LEDS to any color you want for $250. A weeks turnaround and it back better than new.
Anyway if you just want the service I'm also offering 20% off first service, which includes Clean, Lube, Tonearm Balance and replace Cue Light from $66 to $55inc GST.
Give me a call on 0427 268 724
I'm in East Brunswick, Melbourne
Samurai
Samurai AV
042-SAMURAI
042-7268724
Affordable servicing of Technics 1200 and 1210's
and other Sound Gear
042-SAMURAI
042-7268724
Affordable servicing of Technics 1200 and 1210's
and other Sound Gear
Thanks alot
Hey Samurai thats sounds awesome, I thought that sh#t would cost as much as a new turntable. If you can do all of that for $250 I am in. Do I need to do anything for it before, clean it up at all? Take anything off? Do you need the stylus and slipmat? What colors can I get?
Petee
Petee
No worries Petee,
Now you don't need to do anything for it, you hand it to me in watever condition andI will get it back to you better than new.
Take whatever you want off it. I don't need stylus, slipmat, etc. If you can leave the dust cover that would be better for transport.
As for colors, anything you want. Also in Matte, Glossy, Pearl, etc. Pretty much anything goes. Also if you just want me to do all the electronics and you want to get a graphic artist to do some crazy design on it thats also cool, will also reduce costs alot.
I am in the process of repainting one electric Blue, with all blue LEDS, but with a red Quartz Lock LED, will have it by Friday if you want to check it out first and see what you think before I send it to the customer.
Just note, the technics Warranty will be void on new decks with any modifications. Servicing is fine.
Give me a buz tomorrow and we'll sort it all out.
Samurai
Now you don't need to do anything for it, you hand it to me in watever condition andI will get it back to you better than new.
Take whatever you want off it. I don't need stylus, slipmat, etc. If you can leave the dust cover that would be better for transport.
As for colors, anything you want. Also in Matte, Glossy, Pearl, etc. Pretty much anything goes. Also if you just want me to do all the electronics and you want to get a graphic artist to do some crazy design on it thats also cool, will also reduce costs alot.
I am in the process of repainting one electric Blue, with all blue LEDS, but with a red Quartz Lock LED, will have it by Friday if you want to check it out first and see what you think before I send it to the customer.
Just note, the technics Warranty will be void on new decks with any modifications. Servicing is fine.
Give me a buz tomorrow and we'll sort it all out.
Samurai
Samurai AV
042-SAMURAI
042-7268724
Affordable servicing of Technics 1200 and 1210's
and other Sound Gear
042-SAMURAI
042-7268724
Affordable servicing of Technics 1200 and 1210's
and other Sound Gear
Any color
Yeah dude any color, well any as in yellow, blue, orange, green, or white.
And they won't blow like Filament Bulbs.
Samurai
And they won't blow like Filament Bulbs.
Samurai
Samurai AV
042-SAMURAI
042-7268724
Affordable servicing of Technics 1200 and 1210's
and other Sound Gear
042-SAMURAI
042-7268724
Affordable servicing of Technics 1200 and 1210's
and other Sound Gear
Tone arm and electric shock
Aspekt: Replacing a tonearm is quite expensive, with part and labor your looking the best part of $200. From what your saying its kinda stuffed, but should be repairable. It might come down to a replace, but if you want to try and see if it can be done cheaper bring it over and I'll see what I can do, if not then we can replace it and I won't charge you for the initial viewing. Give me a call, I'm doing a few this weekend, plus could show you the full modifed Metalic Blue one I'm working on. My number is 042-SAMURAI or 0427 268 724
Now Focus, what your saying is kinda freaking me out, you were shocked for a day from an unplugged turntable, thats not good, not good at all.
Theres not alot I can say about this one without looking at it. If you'd like me to look at it, I'm offering 20% off labor for first service at the moment.
Give me a call if your interested, phone number above.
Samurai
Now Focus, what your saying is kinda freaking me out, you were shocked for a day from an unplugged turntable, thats not good, not good at all.
Theres not alot I can say about this one without looking at it. If you'd like me to look at it, I'm offering 20% off labor for first service at the moment.
Give me a call if your interested, phone number above.
Samurai
Samurai AV
042-SAMURAI
042-7268724
Affordable servicing of Technics 1200 and 1210's
and other Sound Gear
042-SAMURAI
042-7268724
Affordable servicing of Technics 1200 and 1210's
and other Sound Gear
- SoulWhiteMan
- Posts: 1887
- Joined: Mon Feb 07, 2005 8:03 pm
- Location: Melbourne
- Contact:
Re: I service 1200's
250 per deck?Samurai wrote:Petee
I run a business, servicing 1200's and other DJ gear.
The problem with your Pitch is the 0 point is calibrated by the Quartz lock. This is always 0, but when the 0 on the Pitch is out you get two 0's on your pitch. This can be fixed, no need to buy a new pitch control or anything, just requires pulling the whole thing apart and adjusting some things.
Your Cue light (The pop up light) is a constant problem I deal with. I suggest to people to get rid of the filament bulb and replace it with an LED. These will never blow again. I also offer to replace them with Blue, Orange, Green or Red LED's. The same goes for 33/45 buttons, the On Light Strobe, and the Quartz Lock LED.
I also repaint 1200's, in whatever color you like, in a Baked Enamel so is very strong, won't just scratch off like paint from a spray can. It looks awesome and will make all ya mates jealous.
I have a package if you are interested of Full Service, Clean, Pitch Adjustment, Brake Adjustment, Tonearm Balance, Repaint any color you want with Baked Enamel and replace all LEDS to any color you want for $250. A weeks turnaround and it back better than new.
Anyway if you just want the service I'm also offering 20% off first service, which includes Clean, Lube, Tonearm Balance and replace Cue Light from $66 to $55inc GST.
Give me a call on 0427 268 724
I'm in East Brunswick, Melbourne
Samurai
Price was wrong sorry guys, check out these prices
Sorry all its $170 for a single. For a pair $300, I had been looking at the wrong pricelist. But this is only valid till the end of August.
I'll match the pitch controls between the two aswell.
So that would be,
Repaint whatever color
New LED's whatever color
Brake adjust
Pitch matching
Tonearm adjust
Clean and service.
What colors would you want?
Samurai
I'll match the pitch controls between the two aswell.
So that would be,
Repaint whatever color
New LED's whatever color
Brake adjust
Pitch matching
Tonearm adjust
Clean and service.
What colors would you want?
Samurai
Samurai AV
042-SAMURAI
042-7268724
Affordable servicing of Technics 1200 and 1210's
and other Sound Gear
042-SAMURAI
042-7268724
Affordable servicing of Technics 1200 and 1210's
and other Sound Gear
Tonearm
Aspekt
I have found a place that sell replacement tonearms for half the price of my normal guy.
So it would probably be about $125 inc GST for a replacement and labor.
They are on Backorder though so couldn't tell you when they'll be in.
Samurai
I have found a place that sell replacement tonearms for half the price of my normal guy.
So it would probably be about $125 inc GST for a replacement and labor.
They are on Backorder though so couldn't tell you when they'll be in.
Samurai
Samurai AV
042-SAMURAI
042-7268724
Affordable servicing of Technics 1200 and 1210's
and other Sound Gear
042-SAMURAI
042-7268724
Affordable servicing of Technics 1200 and 1210's
and other Sound Gear
Where abouts are you based Aspekt?
If local I could come around and have a quick look and let you know what is possible. Hope fully we can fix the problem cheaper than full replacement.
I also forgot I'm offering 20% off labor for first service, so if we figure out what neds to be done we can talk price then.
I'm in East Brunswick
Samurai
If local I could come around and have a quick look and let you know what is possible. Hope fully we can fix the problem cheaper than full replacement.
I also forgot I'm offering 20% off labor for first service, so if we figure out what neds to be done we can talk price then.
I'm in East Brunswick
Samurai
Samurai AV
042-SAMURAI
042-7268724
Affordable servicing of Technics 1200 and 1210's
and other Sound Gear
042-SAMURAI
042-7268724
Affordable servicing of Technics 1200 and 1210's
and other Sound Gear
Modified Deck Finished
I have finished the Modified Electric Blue 1200, I don't need to get it to the client for a week, so if anyone wants to come to check it out, I will be available all this weekend and late monday and tuesday nights.
It looks fucking hot. I want to keep it.
Metallic Blue with a pearl mix in the paint, blue strobe light, blue cue light, blue 33 and 45 lights and a bright red Pitch Light.
I will have some photos tomorrow if anyone wants me to email them to them.
If you want to check it out my number is 0427 268 724.
Regards
Samurai
It looks fucking hot. I want to keep it.
Metallic Blue with a pearl mix in the paint, blue strobe light, blue cue light, blue 33 and 45 lights and a bright red Pitch Light.
I will have some photos tomorrow if anyone wants me to email them to them.
If you want to check it out my number is 0427 268 724.
Regards
Samurai
Samurai AV
042-SAMURAI
042-7268724
Affordable servicing of Technics 1200 and 1210's
and other Sound Gear
042-SAMURAI
042-7268724
Affordable servicing of Technics 1200 and 1210's
and other Sound Gear
- saintberry
- Posts: 1259
- Joined: Mon Mar 07, 2005 2:17 pm
Samurai-san! the little screw that holds my target light cover on is burred and needs to be drilled out or the whole assembly needs replacing! (i would prefer the first as it would cost less)
does a Samurai such as your self posses the nimpo required to preform such delicate and precise movements or should i seek ninja AV?
does a Samurai such as your self posses the nimpo required to preform such delicate and precise movements or should i seek ninja AV?
First you get her name. Then you get her number. Then you get some get some in the back seat of a hummer!
- saintberry
- Posts: 1259
- Joined: Mon Mar 07, 2005 2:17 pm
what do you think would be the best bet??? drill it out or replace the whole target light unit??? and how much for either?
the screw is really fucking stuck in there. also it would prob be easier if i just hacked the light out of the circuit and brought it round to yours rather than the whole deck. i can solder it back in. yo cool with that? just wanna gauge on cost cos if its really expensive i wont bother just yet, but would like to get it sorted.
If you dont respond to this ill give you a buzz tomorrow
the screw is really fucking stuck in there. also it would prob be easier if i just hacked the light out of the circuit and brought it round to yours rather than the whole deck. i can solder it back in. yo cool with that? just wanna gauge on cost cos if its really expensive i wont bother just yet, but would like to get it sorted.
If you dont respond to this ill give you a buzz tomorrow
First you get her name. Then you get her number. Then you get some get some in the back seat of a hummer!
Oh geez no need to butcher it, if you can bring it around I'll have a look at it, depending how stripped it is,I should be able to get it out and put a new one in pretty quickly and easily. If its possible, I'll charge ya ten bucks. If not we'll figur out a price on other possibilities.
Where abouts are you?
Samurai
Where abouts are you?
Samurai
Samurai AV
042-SAMURAI
042-7268724
Affordable servicing of Technics 1200 and 1210's
and other Sound Gear
042-SAMURAI
042-7268724
Affordable servicing of Technics 1200 and 1210's
and other Sound Gear
- saintberry
- Posts: 1259
- Joined: Mon Mar 07, 2005 2:17 pm
Modified turntable finished
Alright its finished and I have photos, my email address is [email protected] if you want a geez.
Samurai
Samurai
Samurai AV
042-SAMURAI
042-7268724
Affordable servicing of Technics 1200 and 1210's
and other Sound Gear
042-SAMURAI
042-7268724
Affordable servicing of Technics 1200 and 1210's
and other Sound Gear
Should be no problem with the pitch knob, I'll find a price for you.
This forum won't accept pics off personal computers, I'll have to get them on a website and out the link on for you all. I'll try and get that up today. Would you like me to send you the email with the photos anyway Focus?
Samurai
This forum won't accept pics off personal computers, I'll have to get them on a website and out the link on for you all. I'll try and get that up today. Would you like me to send you the email with the photos anyway Focus?
Samurai
Samurai AV
042-SAMURAI
042-7268724
Affordable servicing of Technics 1200 and 1210's
and other Sound Gear
042-SAMURAI
042-7268724
Affordable servicing of Technics 1200 and 1210's
and other Sound Gear
- Ag3nT[]0raNg3
- old boy
- Posts: 10001
- Joined: Thu Nov 25, 2004 1:29 am
- Location: There was a hole here. It's gone now
- Contact:
- Ag3nT[]0raNg3
- old boy
- Posts: 10001
- Joined: Thu Nov 25, 2004 1:29 am
- Location: There was a hole here. It's gone now
- Contact:
- Dave_wratH
- Posts: 107
- Joined: Wed Mar 09, 2005 1:59 pm
Well, no, I do call Melbourne Home, but I'll check what kind of price I can get on shipping of decks to and from Brisbane and other areas and maybe something could be worked out.
I unfortunately only took photos of this mod, and the rest have gone back to customers.
Next ones I do will send. There might be a job coming up doing 90.7 SYN FM's two studios worth of decks in full metallic Red to match their logo colors. Which will be an awesome sight I reckon.
Samurai
I unfortunately only took photos of this mod, and the rest have gone back to customers.
Next ones I do will send. There might be a job coming up doing 90.7 SYN FM's two studios worth of decks in full metallic Red to match their logo colors. Which will be an awesome sight I reckon.
Samurai
Samurai AV
042-SAMURAI
042-7268724
Affordable servicing of Technics 1200 and 1210's
and other Sound Gear
042-SAMURAI
042-7268724
Affordable servicing of Technics 1200 and 1210's
and other Sound Gear
- Dave_wratH
- Posts: 107
- Joined: Wed Mar 09, 2005 1:59 pm
- Dave_wratH
- Posts: 107
- Joined: Wed Mar 09, 2005 1:59 pm
Haha caught out, that was actually done in photoshop, I am trying to find a place aswell so let me know when you do and vice versa.
You just need to be careful that it is printed correctly or will affect the slip factor and may rub off onto your records.
Samurai
You just need to be careful that it is printed correctly or will affect the slip factor and may rub off onto your records.
Samurai
Samurai AV
042-SAMURAI
042-7268724
Affordable servicing of Technics 1200 and 1210's
and other Sound Gear
042-SAMURAI
042-7268724
Affordable servicing of Technics 1200 and 1210's
and other Sound Gear
Any color pretty much. Two tone, pearl, gloss, matte, mettalic, gold flecks. You can't really see it in the pictures but it is actually a pearl finish, I'm a technician not a photographer. javascript:emoticon('')
Wink
Samurai
Wink
Samurai
Samurai AV
042-SAMURAI
042-7268724
Affordable servicing of Technics 1200 and 1210's
and other Sound Gear
042-SAMURAI
042-7268724
Affordable servicing of Technics 1200 and 1210's
and other Sound Gear
- saintberry
- Posts: 1259
- Joined: Mon Mar 07, 2005 2:17 pm
if you want custom slipmats head to www.slikmats.comDave_wratH wrote:Also where bouts do you get your logo printed onto slipmats? I'm assuming that its screen printed.
dont get anyothers. these are the one and only. i even rate them over the ISP "butter rugs" and DJ Gutters "sewer slimes" for skratching. ive tired them all and sewer slimes and slikmats have the best feel...
just scope the skratchworx review on them http://skratchworx.com/reviews/slikmatsreview1.html
First you get her name. Then you get her number. Then you get some get some in the back seat of a hummer!
New Contact details
Hey all, if you are interested in these modifications or service or repairs of your Technics 1200's you can now contact me at [email protected] aswell as my mobile number 042 SAMURAI (0427 268 724)
Regards
Samurai
SAMURAI AV
[email protected]
042 SAMURAI (0427 268 724)
Regards
Samurai
SAMURAI AV
[email protected]
042 SAMURAI (0427 268 724)
Check out the pics of the modified decks
Hey guys for those who have read about the decks I customise, here are some photos of one I have done before. Website coming with full details and heaps of photos.
Look above for the photos.
Samurai
Look above for the photos.
Samurai
Samurai AV
042-SAMURAI
042-7268724
Affordable servicing of Technics 1200 and 1210's
and other Sound Gear
042-SAMURAI
042-7268724
Affordable servicing of Technics 1200 and 1210's
and other Sound Gear
Lol this thread is "ask Dr.Samurai"!
http://www.soundcloud.com/grooki
Poised above the void on a cloud of dreams, Everything I grasp is sand through my hands
Poised above the void on a cloud of dreams, Everything I grasp is sand through my hands
Dear Doctor Samurai,
Problem
One of my two 1200's (lets name it turntable A) sounds a bit muted and the output vol is lower... if i'm playing something on turntable B, in order for turntable A to sound remotely the same as turntable B, its vol levels would have to peak at least a half time more than turntable B. It's not the vinyl pressing for sure. This muted sounds from turntable A happens infrequently.
Can replacing the RCA cables and resoldering new ones fix it?
Signed,
Annoyed Junglist
Problem
One of my two 1200's (lets name it turntable A) sounds a bit muted and the output vol is lower... if i'm playing something on turntable B, in order for turntable A to sound remotely the same as turntable B, its vol levels would have to peak at least a half time more than turntable B. It's not the vinyl pressing for sure. This muted sounds from turntable A happens infrequently.
Can replacing the RCA cables and resoldering new ones fix it?
Signed,
Annoyed Junglist
Annoyed Junglist,
Do this for me,
Take each deck with the same parameters ie, same record, same cartridge, same input to mixer, then play the same section of the track and see if the levels are different on the LED VU meter on your mixer.
If they are still different then it has to do with your deck. If no difference then take each of those components and test if it is any of them. Also check if you are getting signel from both left and right from the deck.
When you have pin pointed where the issue is coming from you can give me a call on 0427 268 724 and we'll see if its something I can talk you through or maybe bring it in to me.
Regards
Samurai
Do this for me,
Take each deck with the same parameters ie, same record, same cartridge, same input to mixer, then play the same section of the track and see if the levels are different on the LED VU meter on your mixer.
If they are still different then it has to do with your deck. If no difference then take each of those components and test if it is any of them. Also check if you are getting signel from both left and right from the deck.
When you have pin pointed where the issue is coming from you can give me a call on 0427 268 724 and we'll see if its something I can talk you through or maybe bring it in to me.
Regards
Samurai
Samurai AV
042-SAMURAI
042-7268724
Affordable servicing of Technics 1200 and 1210's
and other Sound Gear
042-SAMURAI
042-7268724
Affordable servicing of Technics 1200 and 1210's
and other Sound Gear
you rock. will keep you posted. will give em a full checkup tonight and give you the report.Samurai wrote:Annoyed Junglist,
Do this for me,
Take each deck with the same parameters ie, same record, same cartridge, same input to mixer, then play the same section of the track and see if the levels are different on the LED VU meter on your mixer.
If they are still different then it has to do with your deck. If no difference then take each of those components and test if it is any of them. Also check if you are getting signel from both left and right from the deck.
When you have pin pointed where the issue is coming from you can give me a call on 0427 268 724 and we'll see if its something I can talk you through or maybe bring it in to me.
Regards
Samurai
i love the work you do to the decks... wish i could get you to work on my real pair back home (am not from au.. slave to the books)... gah. and it just wont be worth it to fix up my shitty 1200s.
xx
Re: Anyone service Technics 1200's?
bump for all the massive who stupidly sat on one of their decks trying to get out of affiks's van and bent the tonearm to buggery. sigh.
myspace / too much! / photos (flickr) / photos (tumblr)
aroes wrote:promising, but lost me at offensive mid range snarl
Re: Anyone service Technics 1200's?
need to have a mix at yours at some stage brersame o wrote::fail:
myspace / too much! / photos (flickr) / photos (tumblr)
aroes wrote:promising, but lost me at offensive mid range snarl
Re: Anyone service Technics 1200's?
morrow?
either way will chat today as black cat tonight and such
either way will chat today as black cat tonight and such
Re: Anyone service Technics 1200's?
seen seen
myspace / too much! / photos (flickr) / photos (tumblr)
aroes wrote:promising, but lost me at offensive mid range snarl