$1350 ono
only cause i saw one go on ebay for this not long ago, i know i wouldnt pay that so please feel free to make an offer. all offers over $1000 considered. i can hand deliver in melbourne.
only runs on c-cells no psu.
Obviously the previously owner was using too high voltage psu as robin whittle recommends the boss psu which are like $59 retail. i only ever used batterys, i neglected it when i got the microwave XT, i pondered the devil fish mod but couldn't summon the cash and i think its gone up even more.
from robin whittles release notes.
The machine may work OK with higher input voltages, for a while - but the internal regulator transistor will be asked to drop 180 mA through more than its intended 3.0 volts (9 volts external dropped to 6 volts internally means a 3.0 volt drop across this power transistor and therefore a 0.54 watt dissipation). If you notice the back right of the machine getting too hot, then you are probably driving it with an adaptor which is putting out too high a voltage. This probably won't damage the transistor immediately, but extended use will damage it and make the machine unusable except from C-cell batteries. I have replaced many of these transistors - the TO-220 power transistor at Q-45 2SB596 - with a TIP-30. Some of them have turned brown and have been so hot that solder has melted inside them and been forced out of the package
tb303 4 sale
- Ag3nT[]0raNg3
- old boy
- Posts: 10001
- Joined: Thu Nov 25, 2004 1:29 am
- Location: There was a hole here. It's gone now
- Contact: